Visor Safety & Legal Guide

Your visor is the one thing between your eyes and the road. Every Apex visor is made for a specific helmet and shield mount, built from anti-scratch polycarbonate, and comes with clear guidance on when to use each tint, so you can ride with confidence. This guide explains how we make our visors and the rules that apply where you ride.

Find your fit →

How we build every visor

Made for your exact helmet

Each visor is matched to a specific helmet model, so it fits your helmet's shield mount exactly. No universal fits and no guesswork.

Anti-scratch polycarbonate

Built from polycarbonate, the material helmet makers use for their own visors, with an anti-scratch finish that keeps your view sharp ride after ride.

Clear options for night riding

We make clear finishes alongside our tints, so you always have a visor for night, dusk and poor visibility.

Honest tint labelling

Our smoke and mirror tints are made for daytime and track use, and we say so clearly, so you always know which visor suits which conditions.

Tool-free fitting

Swap visors in minutes using your helmet's own quick-release mechanism, with no drilling, cutting or glue that could compromise the helmet.

Fit support before you buy

Not sure which shield your helmet takes? Use our Find Your Fit guide or contact us and we'll confirm it for you.

Our commitment to transparency

Apex Visors is an independent aftermarket brand. We're not affiliated with or endorsed by any helmet manufacturer. Where a visor is certified to a specific standard, its product page says so. If a listing doesn't name a certification, please don't assume one. Below we set out the rules in Australia, the UK and the US so you can choose the right visor for where you ride.

At a glance

  • Australia: Australian Road Rules, rule 270. Visors to AS 1609; helmets to AS/NZS 1698 or UN ECE 22.05 / 22.06. Visors under 50% light transmission are generally not road-legal, and tinted visors are for daytime use. Rules vary by state.
  • United Kingdom: The Motor Cycles (Eye Protectors) Regulations. Visors to BS 4110 (Kitemarked), UN ECE 22.05 / 22.06 (E-mark), or an equivalent EEA standard. Under 50% light transmission is not legal on the road, and "Daytime Use Only" visors must only be used in daylight.
  • United States: Set by each state. The "DOT" label (FMVSS 218) applies to the helmet itself. States often refer to VESC-8 or ANSI Z87.1 for face shields, and many restrict tinted eye protection at night.

Australia

Helmets

Under rule 270 of the Australian Road Rules, as adopted by each state and territory, riders and pillions must wear an approved motorcycle helmet that is securely fitted and fastened. In NSW, for example, an approved helmet is one that meets AS/NZS 1698 or UN ECE Regulation 22.05 or 22.06.

A helmet should stay in the condition it was approved in. Transport for NSW advises that drilling, screwing or gluing attachments onto a helmet can mean it is no longer treated as an approved helmet, and fines and demerit points may apply.

Visors

  • AS 1609 is the Australian standard for motorcyclists' eye protectors. Visors marked "Clear" transmit 85% or more of visible light. Visors marked "Tinted" transmit between 50% and 85%.
  • UN ECE 22.05 / 22.06 visors must transmit at least 50% of visible light. Tinted visors are labelled for daytime use.
  • Visors darker than 50% light transmission, including many dark smoke and dark mirror tints, are generally not road-legal in Australia. Rider groups report that Western Australia, and Queensland in some cases, have historically been more permissive.
  • Some states apply point-of-sale compliance rules to the whole helmet, so fitting a visor that was not supplied or approved for that helmet may affect its compliance. Check with your state road authority.

United Kingdom

Helmets

Wearing a protective helmet is compulsory when riding a motorcycle on the road in the UK, apart from limited exemptions.

Visors and goggles

Eye protection is not compulsory in the UK. The Highway Code (rule 84) recommends it, and any visor or goggles you do wear must meet the Motor Cycles (Eye Protectors) Regulations. The Department for Transport accepts visors that meet any of the following:

  • BS 4110 grades X, XA, YA or ZA, marked with the standard number, the grade and the BSI Kitemark
  • UN ECE Regulation 22.05 or 22.06, shown by an "E" mark with an approval number starting 05 or 06
  • An equivalent standard accepted by an EEA state, with an equivalent certification mark

Visors that transmit less than 50% of visible light do not meet these standards and cannot legally be used on the road. Visors marked "Daytime Use Only" (or showing the equivalent symbol) must only be used in daylight.

United States

Helmets

In the US, motorcycle helmets are covered by Federal Motor Vehicle Safety Standard 218, often shown as the "DOT" label. The DOT label applies to the helmet. Helmet use laws are set by each state, and they range from universal helmet laws to rules that cover only younger riders.

Eye protection and face shields

  • Eye protection laws are set by each state. NHTSA's most recent published summary of state laws lists most states as requiring eye protection, many with an exemption when the motorcycle has a windshield, and around 15 states with no requirement. State laws change, so confirm the current rule where you ride.
  • State rules often refer to VESC-8 (shields marked "V-8") or ANSI Z87.1. Under VESC-8, clear shields transmit at least 85% of visible light, and tinted shields may transmit down to 20% but are intended for daytime use.
  • Many states restrict tinted eye protection after dark. Florida's rule, for example, says a tinted device "shall not be used at night."

Requirements differ widely between states, so check your state's DMV or highway safety office before riding.

Tint guide

Use this as a general guide. Your local law and the markings on the visor come first.

  • Clear (day and night): maximum light transmission. Suitable for night riding and low light in most jurisdictions.
  • Clear iridescent (day and night*): a clear base with a light iridescent coating. *Check the light transmission and your local rules before riding at night.
  • Light smoke (daytime only): cuts glare in bright conditions. Not for night, dusk or poor visibility.
  • Dark smoke and mirror (daytime and track): for bright daytime and track use. May fall below road-legal light transmission limits in some regions.

Never ride with a tinted or mirrored visor at night, in tunnels, or in poor visibility. Carry a clear visor if your ride could run past sunset.

Care and replacement

  • Check before every ride. Make sure your visor is clean, undamaged and closes securely. The UK Highway Code (rule 83) asks riders to do this before each journey.
  • Replace scratched visors. Scratches scatter light and cause glare, especially from oncoming headlights at night.
  • Clean gently. Use warm water, mild soap and a microfibre cloth. Avoid solvents, glass cleaners and abrasive pads.
  • Fit correctly. Only fit a visor listed for your exact helmet model, and follow the fitting instructions. Never drill, cut or glue a helmet or visor.
  • Stop fogging. Add our Pinlock Anti-Fog Insert, cut for your helmet model, and fit it as instructed so the seal sits evenly.

Questions?

Not sure which visor is right for your helmet or where you ride? Get in touch and we'll help you choose.

Sources

Last reviewed October 2026. This guide summarises public sources and is general information, not legal advice. Road rules differ between states and countries and can change, so check with your local road authority before riding.